Timing equipment for all synchronisation tasks

GPS500 GPS Time Code Generator

The GPS500 is a precision IRIG-B or SMPTE time code generator. It provides a source of very stable time code, referencing time and date information from atomic clocks in the GPS satellite constellation. It extracts timing reference from these signals and generates time code that is synchronized within less than 10 microseconds of UTC (Universal Coordinated Time).
Category: Timing Equipment
Manufacturer: Masterclock Inc.





  • Generates SMPTE, EBU or IRIG-B Time Codes
  • Synchronized to atomic clocks in GPS satellites
  • -11.5 to +12 hour time zone offsets in 30-minute increments
  • Automatic Daylight Saving Time 
  • NMEA/Kinemetrics/Truetime serial protocol output
  • Wide DC power supply input range: 12 to 48 VDC
  • Switch selectable Time Zone and DST
  • Switch selectable format and baud rate



Time Reference

  • When synchronized, the Time Code accuracy is:
    • SMPTE output accuracy of ± 20 microseconds
    • IRIG-B0 (DCLS/PWM) output accuracy of ± 90 microseconds
    • IRIG-B1 (AM) output accuracy of ± 1.4 milliseconds
    • PPS output accuracy of ± 60 nanoseconds
  • Should the GPS500 lose GPS signal it will revert to an internal TCXO oscillator and maintain an accuracy of ± 1 minute per year. The PPS output is synchronized to the internal TCXO oscillator. 


  • SMPTE Time Code  
    • SMPTE, EBU:30, 25 or 24fps  
  • IRIG-B Time Code  
    • IRIG-B: 1 kHz modulated, level - 5 Vpp  
    • IRIG-B: unmodulated, single ended 5 V  
  • PPS  
    • 5 V-TTL, accuracy ± 60 nanoseconds (when synchronized to GPS)  
    • Pulse width configurable via switch from ~200 ms to ~1 ms  
  • Serial output via RS-232/RS-485  NMEA  Kinemetrics/Truetime protocol  
  • Date encoded references (IRIG 1344 and SMPTE Leitch date format or 309M) 


  • Output: 9-pin removable terminal block  
  • Power plug: 3-pin removable terminal block  
  • Antenna: SMA female 


  • Cover: Off-white aluminum  
  • Front/rear panel: Clear anodized aluminum 


  • FCC, CE Marked, ROHS, ANSI

Power Supply  

  • DC input (12-48 VDC)  
  • 12 VDC external wall mount supplied; UL, CE listed  
  • Supplied with US, Euro-plug, British or AUS/NZ, other plugs available 

Antenna Options  

  • Basic antenna package includes magnetic GPS antenna and 15’ (5m) of cable  
  • Standard antenna package includes outdoor GPS antenna, mounting kit, and 50’ (15m) of cable

Do you need any further information?

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
fa fa-envelope-open-o

Receive our Newsletter

to stay informed: about updates, new products and solutions or exhibitions and conferences.

Subscribe to our Newsletter

Mailing Lists

Lange-Electronic GmbH
Rudolf-Diesel-Str. 29a
82216 Gernlinden

+49 8142 284582 0